...
VP -15(P) IP phone includes the following subsystem:
- controller featuring:
- Realtek RTL8972C, highly-integrated System-on-a-Chip (SoC), including a CPU, 100 Mbits switch with a built-in PHY, hardware L2/L3/L4 acceleration;
- flash-memory — 16MВ;
- SDRAM — 128MВ;
- codec (ADC/DAC);
- liquid crystal display with 128x64 px resolution;
Realtek ALC5633Q voice codec;
полноценная цифровая клавиатура с дополнительными функциональными клавишами;
digital keyboard with additional functional keys;
1 x LAN: RJ-45 10/100BASE-T;
1 x PC: RJ-45 10/100BASE-T;
1 x Handset: RJ-9 (4P4C) for connecting a handset;
1 x Headset: RJ-9 (4P4C) for connecting a headset.
Design diagram for device is depicted in the figure below.
The device runs under Linux operating system. Basic control functions are performed by Realtek processor which enables IP packet routing, VoIP operation, etc.
...
| General parameters | |
|---|---|
| Power supply |
|
| Power consumption | up to 4 W (max. current consumption is 0.8 А) |
| Operating temperature range | from +5 to +40°С |
| Relative humidity at 25°С | up to 80% |
| Dimensions (WxHxD) | 205x86x210 mm |
| Weight | up to 0.80 kg |
| Interfaces |
|
Ethernet LAN interface specification | |
| Number of ports | 1 |
| Electric port | RJ-45 |
| Data transmission rate |
|
| Standard support | BASE-T |
Ethernet PC interface specification | |
| Number of ports | 1 |
| Electric port | RJ-45 |
| Data transmission rate |
|
| Standard support | BASE-T |
...
The figure below shows VP-15(P) top panel layout.
VP-15(P) top panel is equipped with LED indicators:
Front panel element | Description | LED state | Device state | |
|---|---|---|---|---|
1 |
| Soft keys indicators | Flexibly configured
| |
2 |
| System indicator | Flexibly configured
| |
3 |
| New message indicator | Flashes green | There are unread messages or new voice messages |
| Off | There are no unread messages or new voice messages | |||
4 |
| Headset indicator | Flashes green | Headset is active |
| Off | Headset is inactive | |||
| 5 |
| Mute indicator | Flashes green | Mute mode is activated for the current call |
| Off | Mute mode is not activated | |||
| 6 |
| Speakerphone indicator | Flashes green | Speakerphone mode is activated |
| Off | Speakerphone mode is not activated | |||
...
The figure below shows VP-15(P) rear panel layout.
Rear panel element | Description | |
|---|---|---|
7 | DC | port for power adapter connection, 5V 2A |
8 | PC | 10/100BASE-T Ethernet port (RJ-45) for connection to a PC |
9 | Reset | Button to restart/reset the device |
| 10 | LAN | 10/100BASE-T Ethernet port (RJ-45) for connection to LAN |
| 11 | Headset | RJ-9 port for headset connection |
| 12 | Handset | RJ-9 port for handset connection |
Status indication on graphic display
Status indication on graphic display
| Number | Description |
|---|---|
| 1 | Indicator of voice interface:
|
| 2 | Current date and time |
| 3 | Names of enabled accounts. If accounts do not have names, phone numbers are displayed |
| 4 | Actions taken upon pressing soft-keys |
...