Оглавление | ||
---|---|---|
|
firmware select
Select the partition from which the next boot will be made, after reboot. To upload firmware to the devices you should use the copy command.
Syntax
firmware select <VALUE>
Parameters
<VALUE> - partitions:
- master - current partition;
- slave - redundant partition.
Privilege group
commands-firmware
Command mode
ROOT
Example
Блок кода | ||
---|---|---|
| ||
LTP-16N# firmware select slave |
firmware update start
Run ONT firmware update with the specified file. To upload firmwares to the devices you should use the copy command.
Syntax
firmware update start interface ont <PORT-ID>[/ONT-ID] filename <NAME>
Parameters
<PORT-ID> - gpon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface ont 1-3 ot interface ont 1,3,5,7).
...
<NAME> - file name. You can see the list of available files using the show firmware ont list command.
Privilege group
commands-interface-ont
Command mode
ROOT
Example
Блок кода | ||
---|---|---|
| ||
LTP-16N# LTP-16N# firmware update start interface ont 1/1 filename ntu-1-3.28.0-build645.fw.bin |
firmware update stop
Stop ONT firmware updates on the channel.
Syntax
firmware update stop interface gpon-port <PORT-ID>
Parameters
<PORT-ID> - gpon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface ont 1-3 ot interface ont 1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
Блок кода | ||
---|---|---|
| ||
LTP-16N# LTP-16N# firmware update stop interface gpon-port 1 |
...