1. Checking an access point (AP) in the Radius database
Before configuring the AP, you should verify that it is added to the NAS table of the RADIUS server. To do this, open the RADIUS/Access points management on RADIUS server menu. Find the access point by using the IP address filter.
...
2. Checking RADIUS status
Select the RADIUS object in the object tree and go to the Monitoring/State checking menu.
Connect to the server console and start the command to verify that the process is running:
| панель | ||||
|---|---|---|---|---|
| ||||
root@SoftWLC:/home/tester# ps -aux | grep eltex-radius |
3. SSID configuration
Open the SSID Manager in the Wireless/SSID manager menu.
Click Add SSID.
...
When you assign a SSID on one radio interface, the Band steer mode should be off.
| Примечание | ||
|---|---|---|
| ||
VLAN-ID = 1000 is used as an example. It should be specified here the service VLAN that is actually used on your network and comes to the access point. The DHCP server must be available to users in the VLAN. |
After clicking the Accept button, the SSID created will be displayed in the SSID table.
Assign SSID to the access point. To do that, select created SSID and click Add SSID link button.
In the opened window, select the key for binding. Binding can be performed by MAC address of AP, by IP address of AP, or by the host domain. Then select the objects to bind (access points or nodes) and click Create link button, the indicator in the tree will change from yellow to green. Click Accept button.
A window will appear with the question “Do you want also to fix SSID links?”. If you want to assign the created SSID to the points immediately, click Yes. If it is necessary that the binding exists only in the database but does not apply to the access point now, click No. Then, if necessary, you can go to the SSID Bindings tab and click the Fix button to assign SSID to the access point, or the binding will be corrected by triggering the corresponding monitor (by default, it occurs once a day).
You can control the SSID assignment process in the Tasks tab.
The created binding is displayed in the SSID links tab.
The SSID will be assigned to the first disabled VAP on the access point. You can see the result in the Configuration/Virtual access points tab.
...
4. Creating Wi-Fi user accounts
You can create accounts in your Personal account.
...
| панель | ||||
|---|---|---|---|---|
| ||||
Username: admin |
Go to the Wi-Fi Users/Enterprise Users tab.
...
Set the login and password for the user, for example test/test. If necessary, the password can be generated by clicking the corresponding button at the end of the line 
.
If the SSID checkbox is selected, authorization of this user will be possible only on the selected SSID.
If the Domain checkbox is selected, authorization of the user will be possible on any SSID belonging to the selected domain.
Specify additional parameters if required: account validity time, tariff (previously created with specified restrictions), user's full name, mobile phone number/Email where new authorization data will be sent when changed on schedule.
Click the Confirm button.
The user is displayed in the table.
Data about connected users will be displayed in EMS in the Wi-Fi Clients tab.
