Version 2.6.3

Fixed

• an error when parsing the ESR configuration in the “Services → Rules” section;
• an error when opening the device page while switching from MES, ESR, or ME to WLC or SMG.

Version 2.6.2

Improved

• support for additional serial numbers has been implemented for the MES2300-48P, MES2300-48P rev.C1, MES2300B-48 AC, and MES2410-08DP switches.

...

• health check for services: the “healthy” status is now set only after the application is actually ready, ensuring correct operation of the keepalived service;
• fixed an error sending notifications to Telegram/email after an update;
• added display of RAM metrics on MES switches;
• display of administrative speed in the L1 quick settings log.

Version 2.6.1

Added

• support for a new switch model: MES2300-48P rev.C1 AC.

...

• an error that caused a newly created problem to not be included in the current normalization cycle and remain open;
• an error configuring an IP address with a /31 subnet mask on an interface via “Services”;
• an error displaying the configuration of MES devices after updating from ECCM 2.5.

Version 2.6

Added

• support for a new switch model: MES5700-32;
• support for new models of FWBA equipment: WOP-3ax-LR5, WOP-3ax-LR6, WB-3P-LR5, WB-3P-LR6;
• the ability to add new devices to an existing IP fabric; 
• Port-Channel management on switches via SNMP SET using the “Quick Settings” feature;
• L1 parameter management on switch interfaces via SNMP SET using the “Quick Settings” feature;
• configuration of individual access point parameters (“MAC Bindings”) via centralized management of the wireless configuration of WLC devices;
• REST API:
  • retrieving device information;
  • retrieving information on groups and group statistics;
  • retrieving information on problems and events;
  • retrieving information on tasks;
• support for ECCM cluster deployment mode to improve system fault tolerance. 

...

• problems not closing automatically after manually refreshing the device availability status;
• unstable operation of group interface configuration on MES14xx/24xx/34xx/37xx switches;
• an error where MES devices of a specified type were not displayed in the device selection form for event generation rules;
• an error when viewing available privileges for a user with the “Operator” role.

Version 2.5.1

Improved

• stack update sequence on MES14xx/24xx/34xx/37xx switches: added support for updating units when the master device is updated;
• updated MIB files for MES2300-xx/3300-xx/3500I-xx/53xx-xx/54xx-xx/5500-xx switches.

...

• an error preventing the disabling of system rules for generating problems.

Version 2.5

Added

• support for a new service router model: ESR-3150;
• support for new switch models: MES2300-24 rev.K1 AC;
• ability to forward events and issues to an external SIEM system;
• quick settings for managing VXLAN via SNMP;
• template-based MES management. Ability to apply profiles for the following features:
  • Common Profile;
  • VLAN database;
  • Interface L2;
  • Switchport;
  • Storm Control.
• field for entering the SNMP Write Community in the fabric initialization dialog box.

...

• the issue of having to open an unused IPv6 socket for monitoring devices via ICMP (monitoring has been implemented in IPv4-only mode);
• inconsistency in units of measurement between the map legend and interface speed graphs;
• display of the “Cloud” icon on network maps;
• default state for the "Completely replace active configuration" option when applying a MES template (changed from "enabled" to "disabled").

Version 2.4.1

Added

• "VLAN" menu item to the "Synchronize" drop-down menu;
• full-text search filtering in the Wireless profile and ESR interface tables.

...

• issues with validation on the LDAP settings page;
• double scrolling when zooming in on certain system dialog boxes;
• file name format for exported tables;
• LLDP update error on devices with high uptime values;
• errors when importing devices using the backup functionality;
• error displaying successful IP SLA tests for ESR.

Version 2.4

Added

• support for a new service router model: ESR-1200 rev.B;
• support for a new switch model: MES3510S-08P DC;
• VLAN management via SNMP SET on switches using the "quick settings" feature:
  • creating a VLAN in the VLAN database on the device;
  • assigning a VLAN to device interfaces;
  • deleting a VLAN from the device;
  • saving the modified configuration to the device's memory;
  • configuration of the SNMP write community in device access settings and when creating an IP fabric.
• support for monitoring and displaying available memory for WLC devices;
• support for distinguishing between system and user rules for generating events and problems:
  • restriction on editing system rules;
  • ability to copy existing rules.

...

• an error where speeds were displayed for VLAN interfaces;
• an error displaying network maps to which the user does not have access;
• an error where the current device interface description was not displayed in the event description;
• an error displaying the “Search in Group” tab for “FWBA” type groups;
• errors when importing MIB archives for third-party devices.

Version 2.3.1

Improved

• the “Search in Group” tab interface;
• the column headers in the ME power input devices table have been standardized.

...

• an error that prevented the creation of an event generation rule based on a syslog message;
• an error in processing parentheses during LDAP user authentication;
• an access issue during prolonged system downtime.

Version 2.3

Added

• support for new service router models: ESR-1200 FSTEC, ESR-1700 FSTEC;
• support for new wireless access controller models: WLC-3250, WLC-3350;
• support for new switch models: MES3500I-24F, MES5320-24;
• support for FWBA equipment models: WB-3P-PTP2, WB-3P-PTP5, WB-3P-PTP6;
• FWBA equipment operation monitoring;
• VLAN monitoring on switches;
• template-based problem descriptions in problem generation rules;
• display of event/problem descriptions in push notifications;
• Device object search within a group:
  • search for a device port (interface) by its description;
  • search for an MES switch port by the MAC address of the subscriber equipment connected to it.
• integration with the Peeper monitoring system.

...

• an error when updating devices to the latest firmware version via the ZTP Manager;

• the problem with displaying the bootloader software version in inventory data;

• an error when changing a password after its expiration;
• an error related to the lack of highlighting for modified lines in the device text configuration editing window;
• Minimum allowed length of a phone number in personal settings: reduced from 7 to 3 digits;
• an error updating general information when changing the mastery on switches in a stack;
• an error querying the software version when updating MES24XX;
• an error detecting ESR-31 interfaces.

Version 2.2.2

Improved

• monitoring service performance.

...

In version 2.2.2, the trend calculation mechanism (for 15 minutes/1 hour) for metrics has been optimized to improve performance. The redesigned mechanism is incompatible with legacy metric data. To prevent the loss of metrics accumulated in ECCM, the system will continue to operate using the old trend calculation logic while simultaneously accumulating data for future implementation of the new logic. This approach will ensure a seamless transition to the optimized trend calculation mechanism without data loss.

Version 2.2.1

Fixed

• WLC data model migration error during update.

Version 2.2

Added

• support for new service router models: ESR-15R FSTEC, ESR-1511 rev.B, ESR-3100 rev.B, ESR-3250, ESR-3350;
• support for new switch models: MES2300-24P rev.C1 DC, MES3500I-8P8F DC;
• “commit-confirm” mechanism for MES5312, MES5316A, MES5324A, and MES5332A switches running firmware version 6.6.9 and later;
• client deauthentication feature on access points;
• flexible configuration of password management policies; 
• user account locking/unlocking feature;
• import/export of event and problem generation rules;
• templating of event descriptions in event generation rules;
• monitoring hardware resources of ME5000 and ME5000M modular routers: 
  • fan status monitoring;
  • power supply status monitoring;
  • line module and routing module monitoring;
• wireless event descriptions;
• new types of wireless events for monitoring unauthorized activities on Wi-Fi networks (WIDS monitoring).

...