firmware select
Select the partition from which the next boot will be made after reboot. To upload firmware to the devices use the copy command.
Syntax
firmware select <VALUE>
Parameters
<VALUE> — partitions::
- master — current partition;
- slave — redundant partition.
Privilege group
commands-firmware
Command mode
ROOT
Example
LTP-16N# firmware select alternate
firmware update start
Run ONT firmware update with the specified file. To upload firmware to the devices use the copy command.
Syntax
firmware update start interface ont <PORT-ID>[/ONT-ID] filename <NAME>
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 ot interface ont 1,3,5,7).
- [ONT-ID] — index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
- <NAME> — file name. List of available files can be viewed using show firmware ont list command.
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# firmware update start interface ont 1/1 filename ntu-1-3.28.0-build645.fw.bin
firmware update stop
Stop ONT firmware updates on the channel.
Syntax
firmware update stop interface ont <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 ot interface ont 1,3,5,7).
- [ONT-ID] — index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# firmware update stop interface ont 1