reconfigure interface pon-port
Reconfigure PON-port interface.
Syntax
reconfigure interface pon-port <PORT-ID>
Parameters
<PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface pon-port 1-3 or interface pon-port 1,3,5,7).
Privilege group
commands-interface-pon-port
Command mode
ROOT
Example
LTP-16N# reconfigure interface pon-port 1
reconfigure interface ont
Reconfigure ONT.
Syntax
reconfigure interface ont <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface ont 1-3 or interface ont 1,3,5,7);
- [ONT-ID] — ONT index in the range [1-128]. The parameter can be set by a range or enumeration (For example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# reconfigure interface ont 1/1-5
reconfigure olt
Reconfigure OLT.
Syntax
reconfigure olt
Parameters
The command does not contain any parameters.
Privilege group
commands-system
Command mode
ROOT
Example
LTP-16N# reconfigure olt