pon network
Ethertype configuration for s-vlan.
Syntax
pon network svlan-ethertype <TYPE>
[no] pon network svlan-ethertype
Parameters
<TYPE> — standard type. May take values 802.1q, 802.1ad.
Default value
802.1q
Privilege group
config-switch
Command mode
CONFIG
Example
LTP-16N(configure)# pon network 802.1q
pon olt unactivated-timeout
Configuration of the ont lifetime in the unactivated status. After the time expires, ont will be removed from monitoring if ont was disabled.
Syntax
pon olt unactivated-timeout <TIME>
[no] pon olt unactivated-timeout
Parameters
<TIME> — unactivated ont lifetime. From 5 to 300 seconds.
Default value
60
Privilege group
config-switch
Command mode
CONFIG
Example
LTP-16N(configure)# pon olt unactivated-timeout 100
pon olt ont-block-time
Configuration of the ont blocking time when a duplication of MAC addresses is detected (learning one MAC address on two OLT ports)
Syntax
pon olt ont-block-time <TIME>
[no] pon olt ont-block-time
Parameters
<TIME> — unactivated ont lifetime. From 30 to 86400 seconds.
Default value
60
Privilege group
config-switch
Command mode
CONFIG
Example
LTP-16N(configure)# pon olt ont-block-time 100