Как сделать чтобы на одно канале смогли работать 128 абонентов?

Для того чтобы на одном канале смогли работать 128 абонентов, необходимо проделать четыре шага:                        

                                                                                               
Обновить LTE-8x до версии 3.14.2.927. Обновить LTE-2x до версии 3.14.2.183.                                    
Необходимо изменить профиль Rules. В данном профиле нужно изменить правила по маршрутизации пакетов.           

Необходимо изменить правила для PON-порта:                                                                                                                                      

•          LTE-2X# profile rules 1                                                                                          
•          LTE-2X(profile-rules)# rule show pon                                                                             

                0) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward                                                

                1) 14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward                                                

                2) 14: if (LinkIndex == 0x2) then path = port 1 queue 0; forward                                                

                3) 14: if (LinkIndex == 0x3) then path = port 1 queue 1; forward                                                

•          LTE-2X(profile-rules)# rule delete pon 1                                                                          
•          LTE-2X(profile-rules)# rule delete pon 2                                                                                                                                  

Для NTE-2 правила PON-порта должны выглядеть так:

                0) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward                                                

                1) 14: if (LinkIndex == 0x1) then path = port 1 queue 0; forward                                 

Заменить правило для UNI1-порта:                                                                                  

•          LTE-2X(profile-rules)# rule show uni1                                                                            

                0) 14: if (Always) then path = link 2 queue 0; forward        

•          LTE-2X(profile-rules)# rule delete uni1 0                                                                        
•          LTE-2X(profile-rules)# rule add uni1 14: if (Always) then path = link 1 queue 0; forward                         
•          LTE-2X(profile-rules)# rule show uni1                                                                            

                0) 14: if (Always) then path = link 1 queue 0; forward         

Для NTE-RG.revB правила PON-порта должны выглядеть так: 

• LTE-2X(profile-rules)# rule show pon

               0) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
               1) 14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward    

Для NTE-RG1421G-Wac правила для PON-порта должны выглядеть так:

             0) 14: if (LinkIndex == 0x1) then path = port 0 queue 2; forward
             1) 14: if (LinkIndex == 0x0) then path = port 0 queue 1; forward

Изменить профиль  Ports, выставить значение Linksperonu - 2.         
                                       

•          LTE-2X# profile ports 1                                                                                          
•          LTE-2X(profile-ports3)# set links 2                                                                              

Изменить профиль Path. В этом профиле необходимо изменить правила по которым пакет попадает в один из линков.                                                                                                                            

•           LTE-2X# profile path 1                                                                                          
•           LTE-2X(profile-path1)# show information                                                                         
•           Index:   1                                                                                                      
•           Description:                                                                                                     
•           Link0 assigned to PATH ID = 0                                                                                   
•           Link1 assigned to PATH ID = 0                                                                                    
•           Link2 assigned to PATH ID = 1                                                                                   
•           Link3 assigned to PATH ID = 1                                                                                    
•           LTE-2X(profile-path1)# set link0 pathid 0                                                                       
•           LTE-2X(profile-path1)# set link1 pathid 1                                                                        
•           LTE-2X(profile-path1)# set link2 pathid unassigned                                                              
•           LTE-2X(profile-path1)# set link3 pathid unassigned                                                               
•           LTE-2X(profile-path1)# show information                                                                         
•           Index:   1                                                                                                       
•           Description:                                                                                                    
•           Link0 assigned to PATH ID = 0                                                                                    
•           Link1 assigned to PATH ID = 1                                                                                   
•           Link2 assigned to PATH ID = unassigned                                                                           
•           Link3 assigned to PATH ID = unassigned                                                                          
•           LTE-2X(profile-path1)# rule delete path0 0                                                                       
•           LTE-2X(profile-path1)# rule delete path1 0                                                                      
•           LTE-2X(profile-path1)# rule add path0 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 0)
•           LTE-2X(profile-path1)# rule add path1 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 1)    

После этого необходимо назначить эти профили на ONT и сделать реконфигурацию.