Eltex Knowledge Base
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

Для этого необходимо воспользоваться командой:

console# show fiber-ports optical-transceiver interface {fastethernet fa_port| gigabitethernet gi_port | tengigabitethernet te_port} detailed

Пример:

console# show fiber-ports optical-transceiver interface GigabitEthernet0/2 detailed

   Port      Temp  Voltage Current  Output        Input        LOS  Transceiver 

             [C]   [V]     [mA]     Power         Power             Type        

                                    [mW / dBm]    [mW / dBm]                   

----------- ------ ------- ------- ------------- ------------- --- -------------

  gi1/0/2     39    3.31    6.10   0.24 / -6.09  0.38 / -4.16  N/S     Fiber    

  • Temp              - Internally measured transceiver temperature
  • Voltage           - Internally measured supply voltage
  • Current           - Measured TX bias current
  • Output Power  - Measured TX output power in milliWatts
  • Input Power     - Measured RX received power in milliWatts
  • LOS               - Loss of signal
  • N/A - Not Available, N/S - Not Supported, W - Warning, E - Error

Transceiver information:

Vendor name: OEM            

Serial number: BL2A3859       

Connector type: LC

Type: SFP/SFP+

Compliance code: 1000BASE-LX

Laser wavelength: 1310 nm

Transfer distance: 20000 m

Diagnostic: supported