Mоnitоring

To enter the system monitoring mode, select 'Monitoring' tab from the panel.

Some pages do not feature automatic update of the device monitoring data. To obtain the current information from the device, clickbutton.

Network parameters monitoring

In the 'Internet' submenu you can view basic network settings of the device.

Access Protocol — protocol used for LAN access.
IP Address — device IP address in the local network.

VoIP connection monitoring

In 'VoIP' submenu you can view VoIP network interface status and monitor accounts.

SIP Accounts Status

№ — number of account;
Account — name of account;
Local Number — subscriber phone number assigned to the current account;
Status — account status:
- on;
- off.
Registration — state of registration on proxy server for the group phone number:
- off — SIP server registration function is disabled in SIP profile settings;
- error — registration was unsuccessful;
- done— registration on SIP server successfully completed.
Expires In — expiration time of account registration on SIP server;
Server Address — address of the server on which the subscriber line has been registered at the last time.

Actual Calls

Local Parameters

Account — name of account through which a call is implemented or on which the call was received;
Number — phone number assigned on the account;
Port — RTP stream local port.

Remote Party

Remote — phone number of opposite party;
Name — opposite party name;
IP Address — IP address of opposite party used for RTP;
Port — UDP port of opposite party used for RTP stream.

Common parameters

Call Start — call start time;
Start Talking — conversation start time;
Talk Duration — conversation duration;
State — call state. Call might be in the following states:
- call — ringback tone is issued (during outcoming call);
- incoming call — ring tone is issued (during incoming call);
- talking;
- holded;
- conference.
Direction — call type:
- incoming;
- outgoing.
Internal Call-ID;
SIP Call-ID.

Viewing information on the device

In the 'Device' submenu you can find general device information.

Device — device model name;
Serial Number — device serial number defined by the manufacturer;
Firmware Version — device firmware version;
Bootloader Version — software version of the device bootstrap;
Hardware Revision — device revision;
MAC Address — device МАС address defined by the manufacturer;
System Time — current date and time defined in the system;
Uptime — time of operation since the last startup or reboot of the device.

Viewing Call History

In the 'Call History' submenu you can view the list of phone calls and the summary for each call.

The device RAM can store up to 100 records for performed calls. If the record number exceeds 100 the oldest records (at the top of the table) will be removed, and new ones will be added at the end of the file.

Call log statistics will not be collected, when the history size is zero.

'Call history' table field description:

No — sequence number of the record in the table;
Account — device subscriber port number;
Local Number — subscriber number assigned to the current subscriber port;
Remote Number — remote subscriber number that the phone connection has been established with;
Call Direction — outgoing or incoming;
Call Type — dialed, missed or answered;
Start Call Time — call received/performed time and date;
Start Talk Time — call start time and date;
Talk Duration — call duration.

In the call history table you can search records by different parameters; to do this, click the 'Filter (show)' link. Filtering can be performed by account, local or remote number, call direction, start call time, call talk time, and call type. For filtering parameter description, see call history table field description above.

To hide the table record filtration parameter settings, click the 'Filter (hide)' link.

To configure call history parameters, click 'Change Call History Settings' link. For detailed parameter configuration description, see 'Phone book' submenu.

Click button to proceed to the table showing the first record.