ip routing
This command enables the L3 routing mode on РР4X. The device will only use route information to transfer DHCP towards Relay Server, full L3 routing is not available in this version.
The negative form of the command sets the default value of the parameter.
Syntax
[no] ip routing
Parameters
The command contains no arguments.
Command mode
CONFIG
Example
ma4000(config)# ip routing
ip route allow
This command adds a new entry to the RR4X routing table: the route to transfer traffic to the specified subnet.
The negative form of the command removes the entry from the table.
Syntax
ip route allow <NETWORK> <GATEWAY> <METRIC>
no ip route allow <NETWORK> <GATEWAY>
Parameters
<NETWORK> – network address/mask in format of A.B.C.D/F.G.H.I;
<GATEWAY> – gateway address;
<METRIC> – route metrics.
Command mode
CONFIG
Example
ma4000(config)# ip route allow 192.168.1.1 192.168.199.2
ip route reject
This command adds a new entry to the RR4X routing table: prohibition to transfer traffic from the specified subnet.
The negative form of the command removes the entry from the table.
Syntax
ip route reject <NETWORK>
no ip route reject <NETWORK>
Parameters
<NETWORK> – network address/mask in format of A.B.C.D/F.G.H.I.
Command mode
CONFIG
Example
ma4000(config)# ip route reject 192.168.22.0/32
show ip route
This command allows to view the static routing table on PP4X.
Syntax
show ip route
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# show ip route IP Forwarding: enabled Codes: C – connected, S – static S 192.168.22.0/32 rejected route S 192.168.32.0/24 via 192.168.33.1 metric 10 vlan 333 C 192.168.33.0/24 is directly connected vlan 333 C 192.168.34.0/24 is directly connected vlan 334 C 192.155.155.0/24 is directly connected vlan 1234
show running-config ip route
This command allows to view the static routing configuration on PP4X.
Syntax
show running-config ip route
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# show running-config ip route route all ma4000# show running-config ip route configure terminal ip routing ip route allow 192.168.1.0/24 192.168.199.2 ip route reject 192.168.22.0/32 exit