relay
This command specifies the DHCP relay address to which DHCP requests in this VLAN will be redirected.
The negative form of the command removes the specified address.
Syntax
[no] relay <IP>
Parameters
<IP> - IP address in format of XXX.XXX.XXX.XXX
Command mode
CONFIG
Example
ma4000(vlan-100)# relay 172.15.2.45
ip interface
This command sets the address of the subinterface from which DHCP packets in this VLAN will be sent.
The negative form of the command removes the specified address.
Syntax
[no] ip interface <IP>
Parameters
<IP> - IP address in format of XXX.XXX.XXX.XXX
Command mode
CONFIG
Example
ma4000(vlan-100)# ip interface 172.15.3.64