interface front-port
Switch to the front ports configuration mode.
Syntax
[no] interface front-port <ID>
Parameters
<ID> — port index in the range [1-8]. The parameter can be a range or an enumeration (for example: interface front-port 1-5 or interface front-port 1,5).
Privilege group
config-interface-front-port
Command mode
CONFIG
Example
LTP-16N(configure)# interface front-port 1-5
channel-group port-channel
Add interface to the aggregation group. When setting force, port settings will be replaced with the group settings.
Syntax
[no] channel-group port-channel <ID>
Parameters
<ID> — aggregation group index.
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-front-3)# channel-group port-channel 1
shutdown
Disable interface.
Syntax
[no] shutdown
Parameters
The command does not contain any parameters.
Default value
Enabled
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-port-channel-1)# shutdown
switchport mode
Set VLAN operation mode.
Syntax
[no] switchport mode <VALUE>
Parameters
<VALUE> — operation modes:
- trunk — interface that accepts only tagged traffic.
Default value
trunk
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-front-3)# switchport mode trunk
vlan allow
Allow VLAN passage on the port-channel.
Syntax
[no] vlan allow <VLAN-ID>
Parameters
<VLAN-ID> — vlan id in the range of [1-4094].
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-front-1)# vlan allow 100
lldp mode
Set LLDPDU sending mode.
Syntax
lldp mode <VALUE>
[no] lldp mode
Parameters
<VALUE> — LLDP operation mode. May take values:
- disabled — disabled;
- transmit-only — only transmit packets;
- receive-only — only receive packets;
- transmit-receive — both transmit and receive.
Default value
disabled
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-front-3)# lldp mode transmit-receive
lldp optional-tlv
Add TLV to transmitted LLDPDU.
Syntax
lldp optional-tlv <VALUE>
[no] optional-tlv [<VALUE>|all]
Parameters
<VALUE> — LLDP operation mode. May take values:
- port-description;
- system-name;
- system-descriptio;
- system-capabilities;
- management-address.
Privilege group
if-front-view
Command mode
IF-FRONT
Example
LTP-16N(config)(if-front-3)# lldp optional-tlv management-address