The MA4000-PX command line interface command system is divided into the hierarchical levels – modes (view).
From the global ROOT mode, you can enter the device parameters' configuration mode – CONFIG mode. Only users with the access level 15 are able to enter the configuration mode.
To switch from the global mode ROOT, you should run the following commands:
ma4000# configure terminal ma4000(config)#
Figure 1 – Command mode hierarchy
Top level of the command hierarchy is shown in Table 3.1.
Table 3.1 – Command modes hierarchy (top level)
Level | Entry command | Prompt line view | Previous level |
|---|---|---|---|
Global mode (ROOT) |
| ma4000# |
|
МА4000 configuration management mode (CONFIG) | configure terminal | ma4000(config)# | ROOT |
Interface сonfiguration | For detailed information see | CONFIG | |
Profiles management | For detailed information see | CONFIG | |
VLAN configuration (VLAN) | vlan | ma4000(vlan-N)# | CONFIG |
Access-list configuration | access-list-any access-list-MAC access-list-ip | ma4000 (acl)# ma4000(acl-mac)# ma4000(acl-ip)# | CONFIG |
Table 3.2 – Interface configuration command modes
Level | Entry command | Prompt line view | Previous level |
|---|---|---|---|
PP4X module external uplink interface configuration (FRONT-PORT) | interface front-port | ma4000(front-port-_)# | CONFIG |
Configuration of PLC8 module external GPON interfaces (GPON-PORT) | interface gpon-port | ma4000(gpon-port-_)# | |
ONT GPON configuration (PLC ONT) | interface ont | ma4000(config)(if-ont-_)# | |
Configuration of PLC8 module external management interface (mgmt) (PLC FRONT-PORT) | interface plc-front-port | ma4000 (switch-config-front-port-_)# | |
Configuration of management interfaces located between the Ethernet switch and PLC8 module olt chips (PLC MGMT-PON-PORT) | interface plc-mgmt-pon-port | ma4000 (plc-mgmt-pon-port-x)# | |
Configuration of PON interfaces located between the Ethernet switch and PLC8 module OLT chips (PLC PON-PORT) | interface plc-pon-port | ma4000 (plc-pon-port-x)# | |
Configuration of the PLC8 module interface aggregation group used for connection to the PP4X module (PLC SLOT-CHANNEL) | Interface plc-slot-channel | ma4000(plc-slot-channel-x)# | |
Configuration of PLC8 module interfaces used for connection to PP4X (PLC SLOT-PORT) | interface plc-slot-port | ma4000 (plc-slot-port-x)# | |
LAG configuration of PP4X module uplink interfaces (PORT-CHANNEL) | interface port-channel | ma4000(port-channel-_)# | |
LAG configuration of PP4X module interfaces for PLC8 modules (PORT-CHANNEL) | interface slot-channel | ma4000(slot-channel-_)# | |
Configuration of PP4X module interfaces for PLC8 modules (SLOT-PORT) | interface slot-port | ma4000(slot-port-_)# | |
Configuration of PP4X module internal stacking interfaces (STACK-PORT) | interface stack-port | ma4000(stack-port-_)# |
Table 3.3 – Device profile command mode description
Level | Entry command | Prompt line view | Previous level |
|---|---|---|---|
Configuring the ONT profiles (template) | template<NAME> | ma4000(ont-template)("name ")# | CONFIG |
Address table profile configuration (PROFILE ADDRESS TABLE) | profile address_table<NAME> | ma4000(config-address-table)("name") | |
ONT GEM port profile configuration (PROFILE CROSS CONNECT) | profile cross-connect<NAME> | ma4000(config-cross-connect)("name")# | |
DBA profile configuration (PROFILE DBA) | profile dba<NAME> | ma4000(config-dba)("name")# | |
DHCP relay agent profile configuration (PROFILE DHCP_RA) | profile dhcp_ra<NAME> | ma4000(config-dhcp-ra)("name")# | |
ONT management profile configuration (PROFILE MANAGEMENT) | profile management<NAME> | ma4000(config-management)("name")# | |
ONT port profile configuration (PROFILE PORTS) | profile ports<NAME> | ma4000(config-ports)("name")# | |
PPPoE intermediate agent profile configuration (PROFILE PPPoE_IA) | profile pppoe_ia<NAME> | ma4000(config-pppoe-ia)("name")# | |
Script profile configuration (PROFILE SCRIPTING) | profile scripting<NAME> | ma4000(scripting)("name")# | |
ONT bandwidth management profile configuration (PROFILE SHAPING) | profile shaping<NAME> | ma4000(config-shaping)("name")# | |
VLAN profile configuration (PROFILE VLAN) | profile vlan<NAME> | ma4000(config-vlan)("name")# |
Global mode
In base command mode (ROOT) you can perform the following:
- system time configuration;
- operation with configuration files:
- application;
- confirmation;
- reset;
- saving;
- undo pending changes;
- copying;
- revert to the confirmed configuration;
- module/crate reboot;
- ONT/OLT reconfiguration;
- reboot, reset ONT to default by OMCI commands;
- ONT firmware update files download;
- PP4X module firmware operation:
- boot;
- selection of the active firmware image.
You can view the following parameters:
- number of connected subscriber optical terminals (ONT);
- list of configured subscriber optical terminals ONT;
- capacity of the received signal from the subscriber's optical terminal;
- PPPoE session tables;
- MAC address tables on the management module/line card/ONT;
- counters and operation status of interfaces;
- information about interfaces operating with the LACP protocol;
- multicast groups that are learnt via IGMP snooping;
- general information about IGMP snooping parameters.
Configuration management mode
The system settings are controlled in CONFIG mode. The mode is available from the global mode (ROOT).
To switch to the configuration mode, you need to execute the following commands:
ma4000#configure terminal ma4000(config)#
In the configuration mode, the adjustment is performed:
- device access parameters: vlan/ip/mask/access-list;
- PP4X/PLC8 module interfaces;
- VLAN parameters;
- DHCP client parameters;
- isolated port groups;
- Selective Q-in-Q feature;
- system log filters;
- OLT/ONT configuration profiles;
- ONT configuration templates;
- adding to configuration and ONT configuration;
- MAC address storage time configuration;
- OLT/ONT configuration parameters;
- access management list;
- queue priorities;
- traffic filtering;
- traffic speed limiting.