Eltex Documentation EN
Быстрые ссылки
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

profile cross-connect

Switch to the cross-connect profile configuration.

Syntax

[no] profile cross-connect <NAME>

Parameters

<NAME> — profile name. set of characters in the range from 1 to 15.

Privilege group

config-interface-ont-profile

Command mode

CONFIG

Example

LTP-16N(configure)# profile cross-connect HSI

bridge group

Sets bridge group index.

Syntax

bridge group <ID>
no bridge group

Parameters

<ID> — group index, in the range of [1-75].

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# bridge group 10

description

Sets profile description.

Syntax

description <VALUE>
no description

Parameters

<VALUE> — set of characters in the range from 1 to 127.

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# description HSI-100

inner vid

Sets inner VLAN ID. Inner tag used in QinQ.

Syntax

inner vid <VID>
no inner vid

Parameters

<VID> — VLAN ID in the range of [1-4094].

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# description HSI-100

iphost enable

Enables iphost for the current profile.

Syntax

iphost enable
no iphost enable

Parameters

The command does not contain parameters.

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# iphost enable

iphost id

Sets id of the iphost that will be used for the current profile.

Syntax

iphost id <VALUE>
no iphost id

Parameters

<VALUE> — id iphost. May take values 1-32.

Default value

1

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# iphost id 31

iphost mode

Sets network settings mode for iphost.

Syntax

iphost mode <MODE>

Parameters

<MODE> — network settings mode:

  • dynamic — obtain network settings for iphost via DHCP;
  • static — use static network settings that are set in interface ont.

Default value

dynamic

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# iphost mode static

multicast enable

Enables multicast traffic passing if profile is assigned to a service.

Syntax

multicast enable
no multicast enable

Parameters

The command does not contain parameters.

Default value

no multicast enable

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# multicast enable

name

Sets profile name.

Profile name is a unique identifier to access a specific profile.

Syntax

name <VALUE>

Parameters

<VALUE> — set of characters in the range from 1 to 15.

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# name HSI-100

ont-mode

Set the operation mode for the ONT OMCI interface.

Syntax

ont-mode <MODE>
no ont-mode

Parameters

<MODE> — OMCI interface operation mode:

  • bridge — set omci-bridge mode;
  • router — set omci-router mode.

Default value

router

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# ont-mode bridge

outer vid

Outer VLAN ID configuration.

Syntax

outer vid <VID>
no outer vid

Parameters

<VID> — VLAN ID in the range of [1-4094].

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# outer vid 100

user vid

Sets user VLAN ID, with this VLAN ID, traffic will come from the UNI port of ONT.

Syntax

pon vid <VID>
no pon vid

Parameters

<VID> — VLAN ID in the range of [1-4094], or untagged for untagged traffic.

Default value

untagged

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# user vid 200

tag-mode

Sets dot1.q or 802.1q interface operation mode for traffic transmission.

Syntax

traffic-model <VALUE>
no traffic-model

Parameters

<VALUE> — operation mode, possible values: single-tagged, double-tagged.

Default value

single-tagged

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# tag-mode double-tagged

traffic-model

Sets traffic transmission model. Types and differences in models are described in TR-156.

Syntax

traffic-model <VALUE>
no traffic-model

Parameters

<VALUE> — model type, possible values: 1-to-1, n-to-1, multicast.

Default value

n-to-1

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# traffic-model multicast

vlan-replace

Determines on which side the VLAN tag will be replaced. It is possible to change the label on the terminal side or on the ONT side.

Syntax

vlan-replace <VALUE>
no vlan-replace

Parameters

<VALUE> — side of tag replacement, possible values: ont-side or olt-side.

Default value

ont-side

Privilege group

config-interface-ont-profile

Command mode

PROFILE-CC

Example

LTP-16N(config)(profile-cross-connect-cc)# vlan-replace olt-side

  • Нет меток