profile cross-connect
Switch to the cross-connect profile configuration.
Syntax
[no] profile cross-connect <NAME>
Parameters
<NAME> — profile name. set of characters in the range from 1 to 15.
Privilege group
config-interface-ont-profile
Command mode
CONFIG
Example
LTP-16N(configure)# profile cross-connect HSI
bridge group
Sets bridge group index.
Syntax
bridge group <ID>
no bridge group
Parameters
<ID> — group index, in the range of [1-75].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# bridge group 10
description
Sets profile description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> — set of characters in the range from 1 to 127.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# description HSI-100
inner vid
Sets inner VLAN ID. Inner tag used in QinQ.
Syntax
inner vid <VID>
no inner vid
Parameters
<VID> — VLAN ID in the range of [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# description HSI-100
iphost enable
Enables iphost for the current profile.
Syntax
iphost enable
no iphost enable
Parameters
The command does not contain parameters.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# iphost enable
iphost id
Sets id of the iphost that will be used for the current profile.
Syntax
iphost id <VALUE>
no iphost id
Parameters
<VALUE> — id iphost. May take values 1-32.
Default value
1
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# iphost id 31
iphost mode
Sets network settings mode for iphost.
Syntax
iphost mode <MODE>
Parameters
<MODE> — network settings mode:
- dynamic — obtain network settings for iphost via DHCP;
- static — use static network settings that are set in interface ont.
Default value
dynamic
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# iphost mode static
multicast enable
Enables multicast traffic passing if profile is assigned to a service.
Syntax
multicast enable
no multicast enable
Parameters
The command does not contain parameters.
Default value
no multicast enable
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# multicast enable
name
Sets profile name.
Syntax
name <VALUE>
Parameters
<VALUE> — set of characters in the range from 1 to 15.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# name HSI-100
ont-mode
Set the operation mode for the ONT OMCI interface.
Syntax
ont-mode <MODE>
no ont-mode
Parameters
<MODE> — OMCI interface operation mode:
- bridge — set omci-bridge mode;
- router — set omci-router mode.
Default value
router
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# ont-mode bridge
outer vid
Outer VLAN ID configuration.
Syntax
outer vid <VID>
no outer vid
Parameters
<VID> — VLAN ID in the range of [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# outer vid 100
user vid
Sets user VLAN ID, with this VLAN ID, traffic will come from the UNI port of ONT.
Syntax
pon vid <VID>
no pon vid
Parameters
<VID> — VLAN ID in the range of [1-4094], or untagged for untagged traffic.
Default value
untagged
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# user vid 200
tag-mode
Sets dot1.q or 802.1q interface operation mode for traffic transmission.
Syntax
traffic-model <VALUE>
no traffic-model
Parameters
<VALUE> — operation mode, possible values: single-tagged, double-tagged.
Default value
single-tagged
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# tag-mode double-tagged
traffic-model
Sets traffic transmission model. Types and differences in models are described in TR-156.
Syntax
traffic-model <VALUE>
no traffic-model
Parameters
<VALUE> — model type, possible values: 1-to-1, n-to-1, multicast.
Default value
n-to-1
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# traffic-model multicast
vlan-replace
Determines on which side the VLAN tag will be replaced. It is possible to change the label on the terminal side or on the ONT side.
Syntax
vlan-replace <VALUE>
no vlan-replace
Parameters
<VALUE> — side of tag replacement, possible values: ont-side or olt-side.
Default value
ont-side
Privilege group
config-interface-ont-profile
Command mode
PROFILE-CC
Example
LTP-16N(config)(profile-cross-connect-cc)# vlan-replace olt-side