Abstract
This manual describes CLI commands for the administrator of the MA4000-PX subscriber access/aggregation node (hereinafter referred to as the device).
Command Line Interface (CLI) allows to perform the device management and monitor its operation and status. You will require the PC application supporting Telnet or SSH protocol operation or direct connection via the console port (e.g. HyperTerminal).
Target Audience
CLI command reference guide is dedicated to the technical staff that performs the MA4000-PX access node configuration and monitoring using the CLI interface. Qualified technical personnel should be familiar with the operation basics of ТСР/IP & UDP/IP protocol stacks and Ethernet and GPON networks design concepts.
Notes and warnings
Notes contain important information, tips or recommendations on device operation and setup.
Warnings are used to inform the user about harmful situations for the device and the user alike, which could cause malfunction or data loss.