...
Figure 13 — "Controllers" page
The The serial number is inserted automatically. Next, click the "Authorize" button.
...
This submenu displays the current status of the relay, discret inputsdiscret inputs, external intrusion sensor and fire alarm.
...
- Purpose — select whether a button or sensor is connected to the input. It is also possible to disable the discrete input function when "Disabled" is selected;
- Active state — selection of the state at which the input actuation will be recorded: closed or open;
- Send events "Door blocked" — enables or disables the sending of a door block event. The flag is available only when the discret input destination is "Sensor";
- Door Block Timeout — timeout value in seconds after which a lock event will be sent if the door is not closed. The default is 30 seconds.
Scroll Pagebreak
"Wiegand" submenu
Figure 22 — "Wiegand" page
...
| Подсказка |
|---|
By default, the tamper sensor is disabled. |
Scroll Pagebreak
"Relay 1," "Relay 2" submenus
...
| Подсказка |
|---|
The local log file stores the contents when the device is powered down and continues to write when power is restored. |
...
"Security" submenu
Figure 29 — "Security" page
...
Figure 30 — "Date and Time" pageScroll Pagebreak
This submenu displays the current date and time on the device and configures the following options:
...
"Firmware Upgrade" submenu
Figure 31 — "Firmware Upgrade" page
...
| Примечание |
|---|
Do not power down the device during the software upgrade process. |
| Scroll Pagebreak |
|---|
"Configuration" submenu
Figure 32 — "Configuration" page
The The following actions are possible in this submenu:
...
| Подсказка |
|---|
A configuration reset can also be performed by holding the RST button on the device for 10 seconds. |
"Reboot" submenu
Figure 33 — "Reboot" page
...