debug arp
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug alarm
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug bonding
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug boot debug-mode
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug boot priority
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug boot unit
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug cfg-manager
This command allows to enable debugging of the configuration manager process trace.
The use of a negative form (no) of the command disables debug traces.
Syntax
[no] debug cfg-manager [<PARAM> ]
Parameters
<PARAM> – allocated action:
- none – enable both types of trace;
- errors – enable enhanced traces for errors;
- routine – enable enhanced traces for standard events.
Command mode
ROOT
Example
ma4000# debug cfg-manager errors
debug clish
This command enables CLI interface debug traces.
The use of the negative form (no) of the command disables CLI interface debug traces.
Syntax
[no] debug clish
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# debug clish
debug clish-completion
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-errors
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-infos
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-manager
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-ptype
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-sockets
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug clish-timers
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug commands-dump
This command allows to display the entire CLI command structure.
Syntax
debug commands-dump
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# debug commands-dump
debug copy
This command enables debug messages output when copying configuration/firmware files from/to external TFTP server.
The use of the negative form (no) of the command disables debug messages output when copying configuration/firmware files.
Syntax
[no] debug copy
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# debug copy
debug cscd
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug cscd election
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug cscd reserve
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug cscd topology
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug dev-exchange sctp-notification
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug dev-exchange
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug dhcp
This command sets permission to output debug messages of DHCP-client/server/relay operation.
The use of the negative form (no) of the command disables debug messages of specified DHCP type.
Syntax
[no] debug dhcp <PARAM>
Parameters
<PARAM> – message type:
- сlient – DHCP client messages,
- common – common messages;
- errors – error messages;
- proxy – DHCP agent messages;
- server –DHCP server messages.
Command mode
ROOT
Example
ma4000# debug dhcp client
debug events
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug fan
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug firmware
This command allows to output debug messages when updating the subsystem firmware.
The use of the negative form (no) of the command disables debug messages output.
Syntax
[no] debug firmware
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000(pp4x)# debug firmware
debug ifm
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug igmp
This command allows to output debug messages when processing IGMP packets.
The use of the negative form (no) of the command disables debug messages output.
Syntax
debug igmp <ACT>
[no] debug igmp <ACT>
Parameters
<ACT> – allocated action:
- fdb – enable output of debugging traces when accessing the IGMP-protocol database;
- group – enable output of debugging traces to events occurring with IGMP groups;
- packet – enable output of debugging traces when receiving/sending IGMP packets.
Command mode
ROOT
Example
ma4000(pp4x)# debug igmp fdb
debug iprouting
This command allows to output debug messages when processing packet routing.
The use of a negative form (no) of the command disables debug traces.
Syntax
debug iprouting <TYPE>
[no] debug iprouting <TYPE>
Parameters
<TYPE> – event type:
- common – enable common event debugging;
- errors – enable error event debugging.
Command mode
ROOT
Example
ma4000# debug iprouting common
debug lacp
This command enables the output of debug messages when processing LACP packets.
The use of the negative form (no) of the command disables debug messages output.
If parameter is not specified, the debug messages will be enabled for all LAC protocol events.
Syntax
debug lacp <ACT>
[no] debug lacp <ACT>
Parameters
<ACT> – allocated action:
- packet – enable debugging when sending/receiving LACP frames;
- port-channel – enable debug messages of LACP for a given group of LAG aggregation of external uplink interfaces, [1 .. 8];
- slot-channel – enable debug messages of the LACP for a given group of LAG interfaces aggregation to connect modules of linear interfaces, [0 .. 15].
Command mode
ROOT
Example
ma4000(pp4x)# debug lacp packet
debug license-manager
The command enables displaying of license manager debug messages.
The use of the negative form (no) of the command disables debug messages output.
Syntax
[no] debug licence-manager <TYPE>
Parameters
<TYPE> – type of events:
- common – enable common event debugging;
- errors – enable error event debugging.
Command mode
ROOT
Example
ma4000(pp4x)# debug license-manager common
debug lldp
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug locks
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug mac-sync duplicate-mac
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug mac-sync sctp-notification
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug maep-manager
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug memory
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug memory pmchal
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug network
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug packet
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug port-states
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug resources pmchal
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug sctp
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug snmp packet
This command enables output of debug messages when exchanging via SNMP.
The use of the negative form of the command (no) disables debug messages.
Syntax
[no] debug snmp packet
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# debug snmp packet
debug snmp
This command enables output of SNMP agent debug messages.
The use of the negative form of the command (no) disables debug messages.
Syntax
[no] debug snmp
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000(pp4x)# debug snmp
debug snmpman
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug sntp
This command enables output of debug traces when the NTP time synchronization protocol is running.
The use of the negative form (no) of the command disables debug messages output.
Syntax
[no] debug sntp
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# debug sntp
debug spanning-tree
This command enables the output of debug traces when processing STP/RSTP packets.
The use of the negative form (no) of the command disables debug traces output.
Syntax
[no] debug spanning-tree <TYPE>
Parameters
<TYPE> – type:
- common;
- errors;
- sync – synchronization.
Command mode
ROOT
Example
ma4000# debug spanning-tree errors
debug stack elections
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
stack reserve-channel
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug storage garbage-collect
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug syslog
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug systemdb
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug test
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug test-link
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug top-manager
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug vlan
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug vlan pvid
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.
debug vlan-manager
This command allows you to enable additional output of debug messages.
The full description of the functionality can be clarified by contacting the technical support service.