Firmware version 3.34.1
Bugs fixed:
- PON. Fixed a bug appeared while ONT configuration.
Firmware version 3.34.0
Features:
- System. Added management of ont-battery alarms.
- System. Added support for reading additional data on SFP.
- SNMP. Added support for dot1qTpFdbTable.
- SNMP. Added support for dot1dStpPortTable.
- SNMP. Added support for dot1dStpPriority, dot1dStpRootCost and dot1dStpRootPort.
- SNMP. Added support for dot3StatsTable.
- PON. Added storm-control for ONT.
- PON. Support for redirection of unknown multicast to the specified GEM port.
- Switch. Added IGMP join sending for static groups.
Bugs fixed:
- Switch. Fixed deletion of the static IGMP group entry when IGMP leave is received.
- System. Fixed insertion of an empty argument when using Tacacs accounting.
- System. Fixed configuration loss while rollback.
- System. Fixed slot reconfiguration while SN ONT deletion.
- SNMP. Fixed index order in the IfTable.
Firmware version 3.32.0.95
Features:
- System. Increased maximum number of services up to 16.
- System. Added display of users authorized via TACACS.
- System. Added logging management for licenses.
- Switch. Added display of management address neighbors LLDP.
- Switch. Added support of additional 802.3 parameters for LLDP.
- SNMP. Optimized ltp8xONTConfigTable and ltp8xONTStateTable.
- SNMP. Added PoE support for ONT LAN ports in SNMP.
- PON. Added DBA delay reduction mode.
- PON. Added PoE support for ONT LAN ports.
- PON. Added support for ONT NTU-52VC, NTU-RG-5440G/5420G, NTU-1 rev.B/rev.C, NTU-MD500.
- PON. Added ONT LAN ports management.
Bugs fixed:
- System. Fixed problem of incorrect port values after reboot for TACACS.
- System. Fixed memory cache overflow.
- PON. Fixed PON password receiving and display.
- PON. Fixed problem of ONT 4th LAN port display.
- PON. Fixed PON password receiving for Unactivated ONT.
- PON. Fixed bringing PPPoE sessions up after mass reboot.
- PON. Fixed ONT activation error after fast reconfiguration.
- SNMP. Fixed lldpRem table operation.
- SNMP. Fixed ONT configuration ability with same PON serial.
- SNMP. Fixed extra parameters occurrence when adding ONT.
Firmware version 3.30.0.207
Features:
- System. Added ability to switch to shell from CLI.
- System. Added SNMP Сommunity encryption in configuration.
- System. Added support for correct display of EquipmentID for NTU-RG-1421 models.
- Switch. Added configuration of packets passing through IP interfaces.
- PON. Added support for optical line length configuration.
- Added OID for downstream BER.
Bugs fixed:
- System. Fixed isolation loss after reboot.
- System. Fixed cli session-timeout loss after reboot.
- System. Fixed problem of profiles and template renaming.
- System. Fixed changing the firmware image forswitc Unit2.
- Fixed pon-password reading for Unactivated ONT.
- Fixed PMCHAL crash.
- Switch. Fixed system crash caused by show running-config alarm command.
- Switch. Fixed system crash when configuring clock summer-time.
- Switch. Fixed system crash while loading.
- Switch. Fixed removing VLAN from slots.
- SNMP. Fixed OID sysName issuance.
- Fixed memory leaks.
- Fixed template configuration.
Firmware version 3.28.2.2
Features:
- PON. Added support for ONT NTU-52V.
Firmware version 3.28.1.9
Features:
- Added support for ONT Ericsson T073G SBM4G00ARA.
- Added support for ONT Ericsson T063G SBM3X10ERA.
Bugs fixed:
- Switch. Fixed system crash while bin loading.
- Switch. Fixed system crash when using large licenses.
- PON. Fixed problem of editing ONT with PON password less than 10 characters.
- PON. Fixed pmchal crash while bringing ONT interface up.
- PON. Fixed pmchal crash when configuring ONT Ericsson T073G.
- PON. Fixed ONT Ericsson configuring when assigning voice cross-connect to a non-zero service.
Firmware version 3.28.0.158
Features:
- Added support for ONT Ericsson T073G, T063G, ONT АТРОН PSG-590, RFT-620.
- PON. Added Voice profile and ability to configure voice service via OMCI.
- PON. Added ability to upload configuration files to ONT.
- Switch. Added ability to configure IGMP Proxy for PP4X.
Bugs fixed:
- System. Fixed access loss to device when authorizing via TACACS after update.
- Switch. Fixed IGMP Proxy operation on the first model.
- SNMP. Fixed an error when adding ONT.
- PON. Fixed adding 0 tag to multicast traffic on the first model.
Firmware version 3.26.3.2
Bugs fixed:
- Operation stabilization.
- Switch. Fixed problem of missing IGMP Snooping Querier Address setting.
- CLI. Message output about missing ONT configuration.
- Changed free RAM emergency threshold.
Firmware version 3.26.2.41
Features:
- Switch. Added ability to enable DHCP requests passing towards ONT.
- PON. Added support for new ONT NTU-RG54xx model.
- PON. Added support for SFP NEOPHOTONICS 38J0-6538E-ST+.
Bugs fixed:
- System. Fixed problem of systemdb crash.
- System. Fixed high CPU load by systemdb process.
- System. Fixed configuration loading by the authentication login default command.
- CLI. Fixed logging filter pp-other command.
- Switch. Model 1. Fixed transposition of General Query to the external mark.
- Switch. Model 1. Fixed sending multicast with 0 tag.
- Switch. Model 1. Fixed IGMP Proxy operation.
- Switch. Fixed system crash while bin refreshing.
- Switch. Fixed VLAN dynamic forwarding.
- SNMP. Fixed Dying Gasp Trap sending.
- Operation stabilization.
- SNMP. Disabled sending plc8RSSIValueTrap by default.
Firmware version 3.26.1.85
Features:
- Added configuration of several DHCP server addresses for DHCP Relay.
- Added VLAN dynamic forwarding for Model 1.
- Added option to disable ONT session limit when PPPoE IA is enabled.
- Implemented monitoring of band utilization by user services.
- Added support for long lines up to 40km.
- Added support of SFP transceiver PTB38J0-6548E-SCPC.
- Forbidden passing Unknown Unicast in default configuration of address-table profile (no edits regarding 3.24.6).
- Added licensing of third-party ONTs.
- Implemented disabling of session monitoring for PPPoE IA.
- Added IPSG configuration for individual VLANs.
- Added message output about configuration backup loading.
- Optimized RAM usage.
- Up to three simultaneous CLI sessions are set by default.
- Implemented monitoring of band utilization by user services in SNMP.
Bugs fixed:
- Fixed problem of PON ports missing from VLAN when rebooting the bin.
- Fixed problem of sending IGMP report if sent simultaneously with IGMP leave.
- Reduced probability of collisions when filling MAC address table.
- Optimized Report sending mechanism when several Queries are received.
- Fixed bringing PPP sessions up in Bridge mode (no edits regarding 3.24.6).
- Fixed PPP sessions clearing during OLT reconfiguration.
- Fixed IPTV problem on a tree that has ONT without Internet service.
- Changed format of FromHost field in syslog messages.
- Fixed incomplete application of configuration to a slot.
- Fixed Alarm freeze on slots.
- Implemented unlocking of ONTs in BLOCKED status when ONT is reconfigured.
- Fixed CLISH crash while logs unloading.
- Fixed firmware ONT files display.
- Fixed CLI crash when requesting spanning-tree active.
Firmware version 3.26.0.1376
Features:
- Added show running-config diff command displaying difference between candidate-config and running-config.
- Added authentication support on OLT via Radius.
- Added IPv6 support in Access-control list functionality.
- Added MLD support.
- Added DHCPv6 Relay Agent and its configuration profiles.
- Added IP Source Guard functionality.
- Added functionality for creating static IGMP groups.
- Added ONT licensing mechanism.
- Added SFP-ONU support.
- Added traffic tunneling support.
Optimization:
- Added ability to interrupt CLI traceroute and copy commands (interruption by Ctrl-C).
Enhanced output and descriptions of several CLI commands, added and redesigned error messages displayed in CLI.
Fixed access level for "no interface ont x/y/z" command. Now available for config-ont privilege.
Changed position of the stack sync-allow command. Now it is in the root section of the CLI.
Added ability to input ONT auto-renewal entries containing spaces.
Renamed show users command to show users config.
Added command for viewing the list of active users.
Modified error messages occurring when downloading the backup.
Unified commands format for displaying active groups, PPP and DHCP sessions (access to information via show interface gpon-port <S>/<P>).
Improved CLISH stability.
Fixed accounting operation via TACACS+.
Fixed operation with several TACACS+ servers.
Added ability to select all ONTs on a particular channel via SNMP.
Added Engine ID automatic generation mechanism for SNMPD when the board is reset to default and manual generation by the "ip snmp agent engine id generate" command.
Optimized issuance of VLAN table and PPPoE sessions.
Optimized uploading backup copy via EMS.
Optimized traps sending via SNMP.
Optimization SNMPD memory usage and speed of reading ONT tables.
Optimized ONT counter request via SNMP.
Fixed SNMPD crash while inquiring ONT UNI ports status.
Optimized output of Ethernet ports statistics.
Implemented removal of auto-update rules when OLT is reset to default.
Increased number of available cross-connect, shaping and dba profiles to 128.
Added automatic channel reconfiguration when changing the assigned VLAN profile.
Fixed errors when loading the startup configuration after firmware update.
Changed IP IGMP Snooping configuration save format .
Optimized system memory usage.
Improved switchd stability when changing master.
DHCP-RA. Added parameters PONSERIAL and DESCR to form 82 PPPoE IA option.
DHCP-RA. Added ability to transfer option 82 DHCP Agent in binary form.
Optimized memory usage by syslog-ng process.
Improved stability of pmchal.
Improved DHCP Relay functionality.
Added DLOLT43BCDS20, DLOLT43CCDS20 and FH-DLT43CCDS20 SFP modules support.
Added MFC 2v0 support (correct fan speed).
Optimized mechanism for calculating allocations number on each channel.
Bugs fixed:
- Fixed quotes reproduction in logging filter-> match setting.
- Fixed autoconfirm at first commit.
- Fixed "no service X" command in template.
- Fixed restrictions on setting a hostname.
- Fixed replacement of PPPoE IA and DHCPRA profile names containing strings of the same name.
- Fixed logging builtin-filter command operation.
- Fixed authorization via TACACS+.
- Fixed new Engine ID application.
- Fixed absence of configuration rollback after commit, if not confirmed, when loading backup via EMS (in case of disconnection after commit).
- Fixed disappearance of SNMP users from configuration when rebooting OLT, as well as when changing Engine ID.
- Fixed removing profiles from ONT settings when removing the profile itself.
- Fixed problem with incorrect ONT configuration due to a certain sequence of configured ONT services.
- Fixed port removal from Management VLAN when enabling ACL and changing Management settings.
- Fixed bugs that caused a partial loss of configuration.
- Fixed operation of some 1Gb Ethernet SFPs.
- Fixed switching to Global Sync mode during master reboot.
- Fixed inability to update firmware between some versions when control boards are restarted separately.
- Fixed OLT reset to factory defaults by button.
- Fixed inoperability of Dualhoming after reboot master command.
- Fixed enabling logging in remote sessions.
- Fixed erasing log files by clear log command.
- Fixed temperature sensor readings at negative temperatures.
- Fixed slot reboot failure after version update.
- Fixed slot communication loss when changing hostname.
- Fixed "Failed while detect newer firmware -1" error when ONT auto-update is disabled.
- Fixed ONT SW/HW version reading problem when multiple ONT are activated.