show cmd-dispatcher
This command is used to view information about the command manager status.
Syntax
show cmd-dispatcher
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# show cmd-dispatcher
Command Dispatcher memory state:
overload count 0
errors 0
size of element 1192
free 500
length 500
show evt-dispatcher
This command is used to view information about the event manager status.
Syntax
show evt-dispatcher
Parameters
The command contains no arguments.
Command mode
ROOT
Example
ma4000# show evt-dispatcher
Command Dispatcher memory state:
overload count 0
errors 0
size of element 992
free 500
length 500
show queue
This command allows to view statistics for a given (or all) queue system.
Syntax
show queue <QUEUE>
Parameters
<QUEUE> – queue number, may take values [0 .. 199].
Command mode
ROOT
Example
ma4000#show queue 0
Queue event top manager :
tx count 13
rx count 13
overload count 0
read from empty count 0
pipe read errors 0
pipe write errors 0
size of element 4
free 500
length 500
show sfp front-port
This command is used to view the status of PP4X board SFP modules.
Syntax
show sfp front-port <RANGE>
Parameters
<RANGE> – interface number. The range of values and numbering rules are described in Table 4.1. If you specify the value 'all' in the command, all interfaces of the given type will be specified. You may specify the list of numbers using comma ( , ) or specify the range using hyphen ( - ).
Command mode
ROOT
Example
ma4000# show sfp front-port all SFP status: ~~~~~~~~~~~ Port Temp [C] Voltage [Volt] Current [mA] RX power [mWatt] TX power [mWatt] ----------------- --------- -------------- ------------ ---------------- ----------- front-port 1/0 N/A N/A N/A N/A N/A front-port 1/1 N/A N/A N/A N/A N/A front-port 1/2 N/A N/A N/A N/A N/A front-port 1/3 N/A N/A N/A N/A N/A front-port 1/4 N/A N/A N/A N/A N/A front-port 1/5 N/A N/A N/A N/A N/A ----------------- --------- -------------- ------------ ---------------- ----------- N/A – Not Available, N/S – Not Supported